volledig gesloten industriële lasersnijmachine 10 m / min snijsnelheid

volledig gesloten industriële lasersnijmachine 10 m / min snijsnelheid

Productdetails

Certificering: ISO9001: 2008
Betalings- en verzendvoorwaarden:
Minimale bestelhoeveelheid: 1
Prijs onderhandeling
Details van de verpakking: houten kist
Levertijd: 7-15 dagen
Leveringscapaciteit: 1 eenheden / maand

Gedetailleerde productbeschrijving

Productnaam:Metal Sheet Fiber Laser Cutting MachineLaservermogen:1000w 1500w
Lasergolflengte:1080nmWerkgebied:3000 * 1500mm
Snijden dikte:0-16 MM (afhankelijk van laservermogen)Stroomvoorziening:380v
Garantie:1 jaar

Productbeschrijving

1. Integrated machine design:left and right collecting drawer on the left and right side of the machine,highly saving space.
2. Stabiliteit en betrouwbaarheid van lichtpadsysteem en controlesysteem.
3. De vezellaser heeft hoge en stabiele functie en levensduur die meer dan 100000 uren is.
4. Hogere snijkwaliteit en efficiëntie met snijsnelheid tot 25 m / min met perfecte snijkant.
5. Krachtig reductiemiddel, toestel en rek; Japanse geleider en balschroef.

Metal Sheet Fiber Laser Cutting Machine​ Advantages

1. low usage cost ,only 0.5-1.5km/h power consumption ,can use air to cut thin metal board.
2. High cutting speed , high effeciency,when cutting thin metal board. The speed can arrive 10m/min.
3. High quality of facula,samll deformation ,smooth and beautiful cutting surface.
4. Using import servomotor and Taiwan ball screw and guide rail ,high cutting precision.
5. Using special software to design all kinds of words or figures,then cutting immediately,flexible working and simple operating.
6. High stability,inport the best laser optical maser,steady performance ,that is the most important parts of Fiber cutter.The lifetime of Laser optical maser is 100,000 hours and free maintenance.
7. Low maintenance cost,no need working with air for the laser optical maser,fiber transmission ,no need reflector mirror , can save plenty of maintenance cost.
8. Simple and convenient operating,fiber transmission,no need adjust the light path.

Metal Sheet Fiber Laser Cutting Machine​ Advantages

1. low usage cost ,only 0.5-1.5km/h power consumption ,can use air to cut thin metal board.
2. High cutting speed , high effeciency,when cutting thin metal board. The speed can arrive 10m/min.
3. High quality of facula,samll deformation ,smooth and beautiful cutting surface.
4. Using import servomotor and Taiwan ball screw and guide rail ,high cutting precision.
5. Using special software to design all kinds of words or figures,then cutting immediately,flexible working and simple operating.
6. High stability,inport the best laser optical maser,steady performance ,that is the most important parts of Fiber cutter.The lifetime of Laser optical maser is 100,000 hours and free maintenance.
7. Low maintenance cost,no need working with air for the laser optical maser,fiber transmission ,no need reflector mirror , can save plenty of maintenance cost.
8. Simple and convenient operating,fiber transmission,no need adjust the light path.

Technische specificaties

Lasergolflengte1080nm
Snijdikte0.2-16mm
Laser uitgangsvermogen1000W
Maximaal verwerkingsbereik3000 * 1500 mm
Machineschijfmodusgeïmporteerde tandheugel en pinon-aandrijving
Y X. nauwkeurigheid van de positionering van de assen± 0.01mm
XY-as herhaalde positioneernauwkeurigheid± 0.01mm
Voeding modus380V / 50Hz
Maximale snijsnelheid45m / min
Minimale snijlijnbreedte0.02mm
Koelmodus3P waterkoeling

Accessoires

Worktable part: the machine adopts double platforms exchange automatically, saving time of loading and unloading materials. High cutting efficiency. Saving time and cost.
The table can carry up to 500KG. The worktable is surrounded by wanxiang ball bearings.
the side of the workbench is installed with the clamping device, which can firmly set the plate on the worktable, so that the plate will not move when the laser is cut.
transmissie
Y axis adopt double drives.
Taiwan Hiwin guide rails and Germany rack and gear
high speed with stability when working
Motors and drives
The X, Y and Z axis are imported servo motors in Japan Yaskawa with high accuracy, high speed, high torque, large inertia and stable performance.
The high speed and speed of the machine are guaranteed
Drives 3kw. high cutting power and precision.
Laser Generator and Laser cutting head
All of our fiber laser cutter are installed with brand name laser generator------Maxphotonics.
Warranty 2 years. low-processing cost and environment-friendly.
Swiss Raytools laser cutting head or Chinese brand name WSX.
Both are high quality and good parameter stability.

Applicatie industrie

Toegepast op de plaatbewerking, luchtvaart, ruimtevaart, elektronica, elektrische apparaten, metroaccessoires, automotive, voedselmachines, textielmachines, engineeringmachines, precisiedelen, schepen, metallurgische apparatuur, liften, huishoudelijke apparaten, geschenken, gereedschap, decoratie, reclame , externe metaalverwerking, verwerking en andere industrieën voor de productie en verwerking van keukengerei.

Applicatiematerialen

Hoofdzakelijk gebruikt voor het snijden van koolstofstaal, siliciumstaal, roestvrij staal, gegalvaniseerde staalplaat, en vele soorten metaalmaterialen snijden en ga zo maar door.

gerelateerde producten